|
DRIVING TRUCKS
|
|
|
You may choose from any one of the three seating position shown below
The body sits on a full length laser cut 6mm steel chasis and our new AME designed twin, sprung sets, of laser cut 6mm steel bogies, fitted with heavy duty springs, the axles are set into sealed ball-race bearings. It has been designed to keep the wheels firmly on the track even on fairly uneven conditions
The heavy duty springs will allow a weighty load to be carried without problem
This design is very modern and an enhancement to any 5" guage railway
This model houses the controls which are plugged into the control box on the loco
Specifications for each truck are by arrangement according to your requirements
The driving truck does not include the controls as shown on this model.
The seat can be at one of three heights, at the height shown, flush with the top or mounted on the top which must be stipulated at time of order
The foot rest can be supplied for ground level track as shown or supplied with styrrups at extra cost for raised level track, or both
Basic Truck Kit:
Body in primer-coat
Chasis (unpainted)
Bogies (unpainted)
Blank steel control panel
Seat and backrest (not upholstered)
3 foot length £425 ex works
Brake for 1 bogie additional £50
This option comes to you as per your specifications, fully painted and upholstered with footrest (styrrups for raised level track are extra)
Brake fitted to 1 bogie additional £70
The heavy duty springs will allow a weighty load to be carried without problem
This design is very modern and an enhancement to any 5" guage railway
The driving truck does not incude the controls.
The seat can be at one of three heights, at the height shown, at the lower level or mounted on the top which must be stipulated at time of order
The foot rest can be supplied for ground level track as shown or supplied with styrrups at extra cost for raised level track, or both
Hopper Truck Kit:
Body in primer-coat
Bogies (unpainted)
Blank steel control panel
Seat and backrest (not upholstered)
Brake for 1 bogie additional £50
Ready to Run:
This option comes to you as per your specifications, fully painted and upholstered with footrest (styrrups for raised level track are extra)
Brake fitted on 1 bogie additional £70
WE ARE ALWAYS HAPPY TO HELP
All pages and pictures ©2007-2008 Abbots Model Engineering